FAQ

How to lay and install colored stone tiles?

Release time: 2021-10-27

The colored stone tile is the base material and is made of aluminum-zinc steel plate. It is suitable for any roof building. Such as wood structure houses, concrete houses, light steel structure houses, etc., have the characteristics of light weight, high strength, rich colors, convenient and quick construction, earthquake resistance, fire resistance, rain resistance, long service life, and maintenance-free. Has been widely used. So what are the installation steps of colored stone metal tile? Let's see.

Preparation of colored stone tile before construction:

(1) Base layer: colored stone metal tile can be used for the roof of any material base layer.

(2) The wooden keel requires dry wood (metal material), the size is 30mm × 25mm, and the surface is subject to anti-corrosion treatment.

(3) Tool preparation: hammer, tape measure, ink bucket, electric drill, cutting saw, bending machine.

(4) auxiliary materials: sealant, riveting parts, nails.

colored stone tile laying installation steps:

(1) In the second row of roof height, the tiles should be laid 150mm away from the inclined ridge plate, and then continue to the other end until the next complete colored stone metal tile is laid. Make sure the back edge of the tile is firmly fixed. Starting from the same location, only two rows of tiles can be installed at a time.

(2) At the junction of roof and vertical wall, the tiles on the wall side shall be bent and covered with the flood edge. The bending line shall be determined according to the distance from the complete tile close to the vertical wall to the vertical wall. Add 40mm as cutting line. Cutting and bending tiles.

(3) The overlapping of colored stone tile equipment can be locked from left to right or from right to left. However, the overlap should return to the prevailing wind direction, rainwater flow direction or rainwater drainage pipes and gutters.

Color stone tile construction matters needing attention:

In the construction of colored stone tiles, attention should be paid to the treatment of some details, which should not only be beautiful, but also prolong the service life. It has a long service life and does not need to be corrected frequently. In short, be careful when construction!

When the construction personnel use metal roof tile materials for construction, the lap joint and outlet of the gutter should be waterproof on one side with the metal roof waterproof system, and then the waterproof boundary should be coated with acrylic waterproof coating. Wet laying sewn polyester cloth, upstream with propylene waterproof coating fully wet.

Roofing chimney, air outlet, fan mouth, etc., during construction, polyester cloth with appropriate size and style shall be sewn, coated with a layer of acrylic waterproof coating on the periphery, covered with a layer of cut and sewn polyester cloth, and then the sewn polyester cloth shall be fully wet with acrylic waterproof coating from upstream to ensure no blistering and wrinkling.

During the construction of colored stone tiles, the lap joint of metal roof shall be coated with acrylic waterproof coating. If the acrylic waterproof coating is not completely wet, it shall be dried from the upstream acrylic waterproof coating.

Color stone tile later construction, deal with the details. Don't ignore these small exceptions. Know the details determine success or failure.

Keywords: Colored stone tile

Back