FAQ

Choose color stone metal tile need to pay attention to these aspects

Release time: 2018-12-03


Metal tile is a common decorative roofing material. The house and clothes are the same, wear it you will expect beautiful appearance. The color stone metal tile is the coat of the house, the design of the color and shape of the tile, and the quality play a decisive role in the appearance of the building. The coat of roof tiles is more important than the human coat. If the coat does not fit, it can be replaced immediately. Metal tiles are not allowed, and the coat of the house is worn for decades.

Therefore, in the choice of metal tile, be careful, can not save a small amount of money, let oneself regret. The choice of colored stone metal tiles has the following points to pay attention to: the color of the metal tiles is soft and uniform, not dazzling, not bright, preferably matte. Due to the poor materials used in metal tiles in small factories, the colors are usually ugly.

Metal tile color durable, windproof sunscreen, rain does not fade. Due to the simple equipment and technology, some small factories cannot evenly spray cement slurry. This kind of metal tile will fall off in a short time, the base will be exposed, and the colored tiles will not be colored, which will be very ugly.

The slope of the metal tile is very soft and gives a sense of beauty. The metal tile shape of the big factory is carefully designed by experts from an artistic point of view. Spread on the roof will give a sense of beauty and intimacy. Small factory metal tile is not so deliberately designed. After the metal tile is placed in the room, it gives a mechanical stiffness and looks very uncomfortable.

The metal tile size is accurate, the lap joint is tight, and the paving error is small. The metal tiles are neatly laid. Large dimensional errors or distortions are often impossible to lay. If the metal tile mold is made of iron, metal tiles with exact dimensions cannot be produced. No one can use this tile.

Good frost resistance. Winter temperatures in the north are often below minus 10 degrees Celsius. If the density of the tile is not good, the water absorption rate is high, the snow water is absorbed during the day, and the ice at night will make the coloring layer expand, causing it to peel off slowly, thereby damaging the metal tile. Since the tiles in small factories are not crushed by high pressure, the compactness is not good, and the service life of the tiles will not last long. The above aspects are particularly important when choosing colored stone metal tiles.

Keywords: