FAQ

How to construct metal colored stone tiles? The composition of metal colored stone tiles

Release time: 2021-08-31

Metal colored stone tileHow to construct?

1. Before the construction of the roof leveling layer, the base layer should be cleaned to ensure that there is no residue on the surface of the concrete base layer.

2, leveling layer with 20mm thick C20 fine stone concrete leveling, leveling layer should be flat and solid, no hollowing, no sand, no cracks, no loose ash.

3. Before construction, the surface of the leveling layer base should be fully wet, but there should be no obvious water. The prepared paint mortar shall be used up within 20 minutes. When applying cement-based permeable crystalline waterproof coating, it should be forced back and forth to ensure that the concave and convex parts are fully coated and the thickness of the yin and yang corners should be uniform. There should be no excessive deposits to prevent cracks when the thickness is too large.

4. polyurethane coating waterproof layer requirements base surface is smooth, clean, no sand. Loose construction, should first apply a layer of primer. After the primer is uniformly cured, the second coating shall be carried out. The coating direction is perpendicular to the previous direction to prevent leakage and scratches. After the coating is completed 35 times in sequence, no one is allowed to enter before the waterproof layer is cured, so as not to damage the waterproof layer.

Metal color stone is composed of aluminum-zinc plated steel plate as the substrate, anti-fingerprint coating, color sand, acrylic resin.

1. The medium aluminum-zinc plated steel plate is plated with a plating solution consisting of 55% aluminum, 43.4 zinc and 1.6 silicon, and its processing performance and coating performance are basically the same as that of galvanized steel plate.

2. The anti-fingerprint coating on the aluminum-zinc plating plays a role in protecting the aluminum-zinc plating layer. At the same time, the fingerprint-resistant coating can better combine the aluminum-zinc steel plate with the colored sand, and the color of the fingerprint-resistant coating can be divided into colorless, transparent and light green.

3. Colored sand is the decorative layer and basic protective layer of metal colored stone, which is made of basalt particles of a certain particle size through high-tech coloring process and high-temperature sintering. More than ten colors can resist ultraviolet radiation and reduce the noise caused by rain in the metal colored stone.

4. Acrylic resin is the key material for bonding steel plate and colored sand, and it is also the protective layer on the sand mining surface, which prevents rainwater leakage in detail and prolongs the life of sand color.


Keywords: Metal tile, colored stone tile, colored stone metal tile, metal colored stone tile

Back