FAQ

Precautions of Jiangsu colored stone tile

Release time: 2021-05-06

InstallationJiangsu colored stone tileNote:

1. Before installing colored stone metal tiles, check the roof of the house to ensure the flatness of the roof.

2. The hose to be installed should be 40*40mm wood with a spacing of 750mm, and firmly connected to the roof structure. Note: Hoses should be treated in accordance with relevant standards.

3. The required hanger should be made of 40*40mm wood, the spacing is from bottom to top, the first row is 345mm, the second row is from bottom to the second row is 370mm, and the spacing of the last row is ≤ 365mm. Note: The boom should be handled according to relevant standards.

4. The suspension board should be evenly placed on the ridge to ensure that the tile surface is flat, the rows are neat, the overlap is tight and the gaps are straight.

5. When fixing each main nail, at least 5 nails should be used; when fixing the round ridge nail, at least 3 nails should be used on one side; when fixing the square ridge nail, at least 5 nails should be used on one side.

6.Jiangsu colored stone tileThe spacing between each ridge tile should be uniform to ensure that the ridge tiles and inclined ridge joints are firm, straight, flat, free of fluctuations and leakage, and it is important to use sealing materials to handle the connection between the ridge and the wall.

7. The immersion should be straight and the joints should be tight to ensure no leakage.

8. The width of the main tile on one side of the ridge tile shall not be less than 50mm, the length of the extended angle plate shall be 20-30mm, the width of the roof such as gable and chimney shall not be less than 50mm, the width of the joint shall be 60-80mm, the width of the main groove and the width of the side of the groove shall not be less than 50mm.

9. It is recommended to use special cutting tools to cut tiles.

10. The mouths on both sides of the ridge tile need to be sealed to ensure smooth and beautiful appearance.

11. When fixing metal bricks, it is recommended to use special galvanized steel nails with a length of 52mm. When the nail enters the 8-12mm of the tile, please use a special punch with a diameter of 8-10mm to avoid damage to the colored stone.

12. GrindingJiangsu colored stone tileEach row of main bricks should be laid from bottom to top and from left to right.


Keywords: Colored stone tile, Jiangsu colored stone tile

Back