FAQ

What is the reason why the colored sand on the surface of the colored sand tile falls?

Release time: 2021-04-19

Many people askcolored sand tileThe surface of the colored sand will not fall, fall will cause the problem of shortening its service life? First of all, the fall of the colored sand will certainly affect the service life of the colored sand tile, as we all know, the steel plate is just a carrier, it is important to cover the surface of the colored sand, which is the layer protection of the colored stone metal tile. If the surface covering is eroded, the service life of the tile will be affected to varying degrees. So what is the cause of the impact of sand?

1. Due to the use of poor quality adhesives, the bonding is not strong. For unscrupulous merchants who use this, everyone can expect his consequences. This kind of binder is generally used in small workshops and belongs to inferior products. How to distinguish between regular manufacturers and small workshops, you need to keep your eyes open.

2. Using a good binder, there is still a lot of sand falling, that is, the production process is immature and there are problems in the baking process. General roastcolored sand tileIt is a rigorous and demanding process. If it is not well controlled, the direct consequence is the firmness problem. This product is strange and works at a range of temperatures.

When the temperature is high,colored sand tileThere will be bubbles on the surface. When the temperature is low, the surface will not dry. This product is an unqualified and inferior product. If this kind of ceramic tile is caused by insufficient temperature, it will dry slowly over time. For products with too high temperature, the bubble position will definitely fall off, which has an impact but is limited.

3. Sporadic frictioncolored sand tileThe surface is a normal phenomenon. In the process of producing colored stone metal tiles, the adhesive will cover the surface of colored stone metal tiles. At that time, the surface was not baked at high temperature, and workers would not touch it with their hands. There will be some floating sand on the surface, which is not bonded to the galvanized steel plate at all, or just a small corner of the colored sand. If the secondary binder is not cleaned when spraying, it will remain on the surface of the colored stone metal tile and form floating sand. After the finished product comes out, touch the friction with your hands may drop a little. This is a normal phenomenon and can be used with confidence.


Keywords: Color stone tile, color stone metal tile, color sand tile

Back