FAQ

How to simulate the color stone metal tile test

Release time: 2021-02-08

160914240754.jpg

As we all know, metal tile is a very commonly used building material for our country's buildings. With its existence, it greatly enriches the style of the house, especially for the roof. If you want to get a long-term roof, you can't avoid the need to come into contact with colored stone metal tiles. So a good product, before the market often need to go through a variety of simulation tests, in order to successfully listed, to reach the hands of each user and get a five-star evaluation, then you know that manufacturers in the production of net color stone metal tile, how to color stone metal tile simulation test.

If you want to test the performance of colored stone metal tiles, you have to use ultraviolet rays or ordinary baking lamps to simulate the direct state of sunlight to ensure that the damage of sunshine and temperature can be close to our daily situation. In this way, when you use it, you can ensure the quality of the product is close to our reality and predict its service life. An important step here is to simulate the temperature. According to the requirements of some relevant specifications, the temperature range of the laboratory should be controlled to -25 ℃ to 30 ℃. However, due to the fact that the cost of some refrigeration equipment is very expensive and the temperature variation range in warm winter and hot summer areas is also required, most manufacturers carry out simulation according to 0 ℃ to 70 ℃. What kind of method is used to carry out experiments in the simulation process?

First of all, it is necessary to make a range between 0 ℃ and 10 ℃. In this process, ice cubes are mainly used to aim at a sealed laboratory for substantial cooling. At the same time, ice-water mixture is used to spray and cool the colored stone metal tiles in the test, so as to achieve the effect of rapid cooling in a short time. The second is the range of 10 ℃ to 50 ℃, which is a relatively large range of contact temperature and is usually the temperature in our daily life. In this process, the temperature control box is mainly used to adjust the temperature of the sealed laboratory. The adjustable degree is room temperature to 50 ℃, and some auxiliary electric heating means are needed to heat. After that, it is 50 ℃ to 70 ℃. Everyone knows that the sunshine time in summer is very long and the radiation intensity is high. At this time, it is necessary to simulate baking of colored stone metal tiles.

Keywords: Metal colored stone tile, colored stone metal tile

Back