FAQ

How to construct colored stone tile? How to accept after construction?

Release time: 2021-01-08

Colored stone tileThe roof system adopts the method of self-locking lap joint and horizontal nailing. In addition, the complete waterproof performance of the steel plate has self-waterproof characteristics (the base layer is prepared, and the cast-in-place concrete roof can be directly hung with tiles). The single-sided steel tile has a large area, the installation is quick and convenient, and the construction period is shortened. Skilled workers can install 70-80 square meters independently every day.

Colored stone tileConstruction is simple: the thickness and quality of stone metal tile is only about 16 of ordinary cement and clay tile. It is very light, easy to cut and bend. The colored stone tiles also have matching joint accessories, which make the installation easier, faster and more convenient. It can also be easily built in high-rise buildings and large slope buildings.

1. According to the laid wooden keel row, the wooden square with a width of 30mm and a height of 25mm is fixed on the cement base (along the water belt) along the line. The spacing is not more than 600mm, and the depth of riveting into the base is not less than 30mm. After the downstream belt is installed, nail the hanging belt to the downstream belt. In the horizontal direction, the tiles shall be continuous one by one, and only disconnected on both sides of the gutter and roof control line, with a spacing of 368mm.

2. In order to ensure that the tiles are on the same plane, when installing the tiles, wooden wedges of different sizes can be added under the tiles to adjust the surface flatness of the tiles;

3. In order to meet the installation requirements of roof tiles and metal edges, the height of the wooden keel can be increased by 40mm at the ridge, gable edge and the outer edge of the herringbone;

4. The lightning rod can be installed at the same time and cooperate with each other.

Colored stone tileacceptance of sloping roof tile:

1. Material acceptance: wood or metal materials of corresponding specifications that are not easy to deform after drying and preservative treatment.

2. Dimensional acceptance: the cross-sectional dimension of the brick hanging frame is 30mm × 25mm, with an error of 3mm.

3. Acceptance of arrangement spacing: except that the spacing between the eaves and the ridge is less than 368mm, the standard spacing of tiles is 368mm.

4. Flatness acceptance: for each roof brick pull wire, detect flatness error, allowable error 5mm.

5.Colored stone tileStability acceptance: check whether the tile hanger is loose and whether it is firmly connected with the base.


Keywords: Metal tile, colored stone tile, colored stone metal tile

Back