FAQ

Do you know how to correctly lay and fix the cover of the color steel tile

Release time: 2019-01-15

1. color steel tile the correct way of laying:

1. Overlapping type (applicable to roof with length ≦ 15M)

2. Staggered type (applicable to roofing with length ≧ 15M)

 

你知道彩钢瓦如何正确铺放和固定封盖吗

 

2. color steel tile special nail correct use method:

1. The special nail of color steel tile must be hit in the middle of tile bone to have waterproof effect.

2, color steel tile special nail fixed interval is 50CM ~ 100CM (preferably 4/㎡).

3. The special nail must be hit from the lower end of the tile to the roof in order to have a beautiful, sealed and neat effect.

3. color steel tile installation sealing strip ridge tile sealing cover:

1. Separate the color steel tile sealing strip in half, press the control tile type on the roof and cover the ridge tile with special nails.

2. At the junction of the side tiles of the colored steel tiles, the ridge tiles shall be directly covered after sealing with cement, and the bottom of the ridge tiles shall be finished with a small tile stop.

3. The lower end of the color steel tile is directly installed at the eave cover and fixed with screws.

4. At the junction of ridge tiles, the control interface shall be trimmed with scissors, overlapped and sealed with glass glue.

The above is about the color steel tile related content, I hope to help you.

Keywords:

Back