FAQ

Structure of colored stone metal tile

Release time: 2022-11-14

　　 Color stone metal tile it is made of aluminized zinc steel plate as the base material, fingerprint resistant coating, colored sand, acrylic as well as resin, acrylate. The aluminum-galvanized steel sheet is made of hot-dip galvanizing of 55% aluminum, 43.4 zinc and 1.6 silicon. The processing and coating of aluminized steel sheet is basically the same as that of galvanized steel sheet. The normal service life of aluminized steel sheet is 2-6 times that of ordinary galvanized steel sheet.

彩石金属瓦

　　 The aluminum-zinc coating is a fingerprint-resistant coating. The fingerprint-resistant coating can play a role in environmental protection of the aluminum-zinc layer, and the fingerprint-resistant coating can better combine the aluminum-zinc plate with the colored sand. The fingerprint-resistant coating is mainly divided into a colorless, transparent and light green color. Sintered colored sand is a metal tile decorative layer and protective layer made of basalt particles of a certain size by high-tech coloring process and high temperature sintering. With its own more than ten colors, it can withstand direct ultraviolet radiation, which can reduce the noise caused by urban rainwater on metal tiles.


　　 Acrylate is the key material for color sand bonding steel plate. It can also be used as a protective layer on the sand digging surface to prevent detailed leakage of rainwater and extend the service life of colored sand. Color stone metal tile composition: acrylic resin protective layer, scorched sand layer, acrylic adhesive layer, aluminum zinc alloy layer, steel substrate, aluminum zinc alloy layer, fingerprint resistant protective layer.


　　 Color stone metal tile types: seven wave tiles (curved tiles), eight wave tiles (Milan tiles), beveled tiles (diamond tiles) wood tile, square tile, small Rome, large Rome. Colored stone metal tile type impact resistance-when an earthquake occurs, the metal tile will not slide down like ordinary tiles, thereby reducing damage.


　　 Lightweight-Reduce the light weight of the building's load-bearing capacity. Convenient construction management-light weight, large area, simple accessories, greatly reduce the intensity of construction work, shorten the construction unit time. Economical-Construction on the roof of old buildings does not require the removal of any roofing materials, and can be carried out directly, thereby reducing the cost of waste disposal.


　　 Color stone metal tile has weather resistance, moisture resistance, salt spray resistance, impact resistance, acid resistance, alkali resistance, heat resistance, non-combustible and other properties. This product is based on aluminum-zinc plated steel plate and treated with multi-layer protective film to resist severe cold, hail, rainstorm, rain and snow, extreme heat, earthquake and other severe weather and natural disasters. So it will not crack, aging, fire, air transportation, and has a long service life.

　　 Colored stone metal tiles can be used in wood structures, steel frames, steel grids, and concrete roofing. Due to the characteristics of easy bending and cutting, it is suitable for various buildings of enterprises. For the slope (12-90 degrees) roof, it can also be safely managed and constructed, especially for the "flat slope roof transformation" project. At the same time, it can replace the original clay tile, cement tile, color steel plate, glass fiber asphalt tile, slate tile, etc., and can be directly constructed without removing the original roof. Due to the large surface area, light weight, bendable and cuttable metal tiles, they are firmly fixed to each other through the use of unique buckle design and construction and horizontal nails. This dry construction, simple and convenient, saving building materials.


Keywords: Colored stone metal tile

Back