FAQ

Features of colored stone metal tile

Release time: 2022-09-06

Modern villa design pursues elegance, elegance and dignity. As the saying goes, "A good meal is not afraid of late". A grand single-family villa needs ordinary high school-end metal tiles to "crown" it ".Colored stone metal tileThe calcined colored sand outside is undoubtedly a beautiful scenery line under the sun and after the rain.

Color stone metal tile is made of fingerprint-resistant aluminum-zinc plated steel coil, and the surface color sand is made of French color sand. It is produced by volcanic rock, the use of ceramic continuous high temperature burning processing technology to burn the primary color limestone into a mixed color. This tone adds a natural beauty to the roof and a hard natural barrier to the fingerprint-resistant coated aluminized zinc plate.

As a non-primary colored sand, it is harmed by the ultraviolet light of the sun. Fade and anti-algae become a way to distinguish between good and bad metal tiles. Colored stone metal tiles do not grow algae and the color tone will not last forever. At the same time, the metal tile has a strong viscosity and good aging resistance, to ensure that the metal tile in very cold areas can not crack sand.

Color stone metal tile with its beautiful and generous, lightweight, durable, environmental protection characteristics, colorful and diverse metal tile in the roof of the actual effect of the pavement is very beautiful and generous, has become the mainstream roof waterproof material tile goods.

Installation steps of colored stone metal tile paving roof at inclined ridge

In the second row of the flat roof, tiles are gradually paved at 150mm from the inclined ridge plate, and then continue to be paved to the other end until the paving of the latter piece of detailed colored stone metal tiles is successful. Ensure that the back edge of the tile is firmly fixed, and only two rows of tiles down are assembled at a time, and their starting positions are the same.

Colored stone metal tile machine equipment shop for flat roof and vertical wall work junction, should be the wall side of the tile sheet metal bending, roof drainage margin cover it. The bend line is determined by the distance from a detailed tile near the vertical wall to the vertical wall. Plus 40mm for the cutting line. Laser cut and sheet metal bend tiles.

The steel bars of the colored stone metal tile equipment can be overlapped from left to right or from right to left, all of which are self-locking and interlocking. However, the overlapping part of the steel bar should face away from the prevailing wind direction, precipitation inflow or precipitation discharge pipe and roof gutter. The laying order is generally from the eaves from below above all to the ridge.

Colored stone steel tile is a kind of corrugated profiled steel plate made of color coated steel plate and cold drawn by rolling. It is suitable for industrial and industrial buildings, warehouses, special engineering buildings, roofs, walls and interior and exterior wall decoration of large-span steel structure houses, etc. It has the characteristics of light weight, high strength, colorful colors, time-saving and labor-saving in engineering construction, seismic grade, fire safety, waterproof and rainproof, long service life, maintenance-free, etc, has been widely used to promote.


Keywords: Colored stone metal tile

Back