Tianjin color tile maintenance matters needing attention in the introduction, come and collect!

Release time: 2022-07-12

Tianjin color stone tile is composed of aluminum zinc plated steel plate as the substrate, fingerprint resistant coating, color sand, acrylic resin.

1) The medium aluminum-zinc steel plate is made up of 55% aluminum, 43.4 zinc and 1.6 silicon electroplating solution, and its processability and coating property are basically the same as galvanized steel plate.

2) The aluminum-zinc coating is coated with a fingerprint-resistant coating to protect the aluminum-zinc coating. At the same time, the fingerprint-resistant coating can better combine the aluminum-zinc steel plate with the colored sand. The color of the fingerprint-resistant coating is divided into Colorless, transparent and light green.

3) color sand is metal tile decorative layer and grass-roots protective layer, it is by a certain particle size of basalt particles after high-tech coloring process and high temperature sintering. It has more than ten colors, can resist ultraviolet radiation, and can reduce the noise of metal tiles due to rain.

4) Acrylic resin is the key material for bonding steel plate and colored sand, and it is also the protective layer on the sand mining surface, which can prevent rainwater leakage from the details and extend the life of the sand color.

What are the matters needing attention in the maintenance of Tianjin colored stone tiles? Let's take a brief look at it.

1. Color stone tile flooding is a very important aspect. Check the roof flooding. If you want to check the roof, you must check its flooding. These strips of sheet metal, usually aluminum-zinc plated steel, are placed in the key in the roof to prevent water from seeping into the home. When checking a home for a flood, see cracks or openings. These are the factors that cause the roof to leak or damage.

Drainage ditch is a very important aspect, you need to check the drainage ditch. At the same time, check the downpipes and drain pipes to ensure that no debris is collected in them, which may interfere with the normal operation of the drain pipe.

3. The growing branches have reached the roof and may be worn out by the wind blowing the branches and scraping on your roof. You should trim them to prevent them from falling off.

4. If you find loose colored stone tile, repair it with roof cement, a small amount of cement painted on the underside of the roof slab to fix it, if you find that it has been damaged or lost, remove the damage and replace the missing as soon as possible.

5. Do a good job of roof inspection, check whether there are moss and algae, if there are moss and algae on your roof will promote the deterioration of metal tiles. If you find that metal shingles have algae or moss growing on your roof, you should remove them. Zinc or lead control strips can be used.

Tianjin colored stone tile is used to cover the slope roof material in a more commonly used, if you want to strengthen the use of Tianjin colored stone tile, to do the following:

1. Trim trees to prevent branches or branches from falling to the roof and causing damage; 2. Replace missing or damaged tiles in time; 3. Check the roof every year for obvious damage, raised or broken tiles; 4. Beware of ice formed along the eaves; 5. Regularly check the bottom of the roof for signs of leakage or damage, especially around ventilation ducts and chimneys; 6. Keep the attic well ventilated in winter. Poor attic ventilation can cause structural damage to the roof. Pay more attention to maintenance during normal use to strengthen the service life of colored stone tiles.

Keywords: Tianjin colored stone tile

Back

Related News