fuda
Products
  • undefined
undefined
+

800 metal tile (size can be customized)

Metal tile is a roof tile, mostly used in light steel houses, wooden house structure, concrete structure, flat slope, villa, etc. But in fact, metal tiles can also be used for roof decoration, more and more popular trust and love. Color stone metal tile using tiles and tiles, tiles and structural layer interlocking way, strong and lightweight, with strong shock resistance. In addition, its surface and base are non-flammable materials, with strong fire performance.
  • Commodity name： 800 metal tile (size can be customized)

Product Classification:

Products (old)

Telephone:

+86-15345459654

Online message
Related Products
  • Product Description

  • Metal tile construction steps

    1. preparation

    When we hang metal tiles, we require a completely dried size2.5mm×30mmof wood, and the surface of the wood strip needs to be painted with two bituminous paint for anti-corrosion treatment. At the same time, prepare the necessary tools and materials such as hammer, cutting saw, tape measure, riveting, bending machine, metal tile, ink bucket, sealant, nail, electric drill, etc. in advance.

    2. measurement and setting out

    When installing metal tiles, the first thing to do is to make an accurate measurement of the roof, and the spacing on the roof base is not greater600mmThe downstream line, pull out the cornice line and cornice elevation control line, and use the engineering line to hang out the control line of the roof ridge, used to facilitate the control of the roof ridge downstream strip.

    3. Shunshui StripFixed

    Expansion bolts are usually used to fix the downstream strip on the base of the concrete roof. The spacing of the expansion bolts is1200mm, the section size of the wooden downstream bar is30mm×40mm, if it is a roof with large window radian, the length of the downstream strip can be adjusted200mm.

    4. hanging tile fixed

    Wiring shall be arranged according to the placed tile-hanging strip, and the wooden strips shall be continuously placed one by one along the horizontal direction of the ink line at the base layer, and fixed on the cement base layer with plastic expansion bolts. Wooden wedges of different sizes shall be added under the tile-hanging strip to adjust the flatness of the tile-hanging strip surface, and lightning protection vertical rods can be installed at the same time.

    5. metal tile laying

    At this time, use anti-rust metal nails to nail the hanging tile horizontally, fix the metal tile, and overlap the ridge tile at the roof ridge in the downwind direction. Note that the nails used for each metal tile shall not be less5and the depth of extending into the tile bar shall not be less20mm.

    6. roof gutter laying

    At the roof gutter, first lay and fix the gutter tiles, and then lay the metal tiles, Use steel nails to fix the roof gutter plate and the gutter tile.

    Construction acceptance of 7. metal tile

    After the construction of metal tiles is completed, an acceptance shall be made for the laying construction to check whether the roof is clean and tidy. Whether the metal tiles are laid flat and skewed; Whether the overlap of tiles is firm.

Key words:

Online message

submit